Friday, April 28, 2006

Military Airband

Just a word on military frequencies, since the major shake up of all military frequencies in January throughout NATO I have so far noted the following frequencies in use by Swanwick/London military:

252.875
256.575 (lichfield corridor)
275.625
277.625
278.6
280.35
231.525
397.175 (recently heard F15's using this as a discreet freq. while practising air combat)
233.725
269.475
259.6
251.075
277.775
280.35

regards, Mark

Airband Books

Tuesday, April 25, 2006

Air Traffic Control R/T Procedure Changes

Graham Duke has kindly contributed the following:

For your information, new procedures for frequencies will come into operation on 1st May.

On that date, in UK airspace, frequencies will be spoken in 6 digits ( instead of 5 as present), except where the last two digits are both zero.

Also, the use of the word "channel" will be discontinued.

For example, 127.375 will be spoken as "one two seven decimal three seven five"

135.200 will be spoken as "one three five decimal zero"


Thanks for that info Graham.

Airband Books

Sunday, April 23, 2006

Yupiteru MVT 8000 Airband Scanner

I have received a question from a reader who has just purchased a Yupiteru MVT 8000 radio scanner and is requesting some feedback on this radio. I believe it is basically a 'base station' version of the yupiteru MVT 7100 but I have never owned one, perhaps another reader has some further information?

Wednesday, April 12, 2006

Airband Scanner Recommendations Please!

Dear Readers, I would appreciate your recommendations regarding a new airband scanner for both VHF civil & UHF military listening. I currently use a Yupiteru MVT 7100 but would like a comparable scanner that will allow for 'alpha tagging' of memory channels. Dynamic memory banks would be ideal but not essential, likewise pc control would not be essential either.

At present I am considering a Uniden BCD396T (have to buy from the US) which even has what they call 'close call' which will seek out strong local signals and copy them to memory. Imagine being at an airfield and being able to intercept all local transmissions with the frequency immediately displayed and stored!

Also the 'alpha tagging' would need to accommodate a good number of letters/numbers for instance, I might want to enter 'Lakenheath CH10' etc.

So please hit the 'comment' button and let me know!


Aviation Posters

Airband Books

Aviation Books

Saturday, April 08, 2006

Airband & 8.33KHz Frequencies

A note below from Graham Duke for all airband listeners re: 8.33KHz frequencies:

'The recent introduction of the new 8.33kHz channels in UK airspace may have resulted in unexpected consequencies for some airband listeners.
For example, it may have been possible to hear the controller on the original 25kHz frequency, but nothing is being heard on its replacement 8.33 channel.
This is because the two systems operate in different ways.
Under the original 25kHz system, the signals were usually transmitted from two or three different sites.
However, this is not possible under the 8.33kHz, and only one transmitter can be used.
This means that the transmitter near you may no longer be in use for the new 8.33kHz channel, therefore the controller can no longer be heard.
It does not mean that there is a fault with your receiver. PROVIDED YOU ARE WITHIN RANGE of the transmitter, the controller will be heard.
Your radio needs EITHER 8.33kHz steps OR 5Khz steps to do this.'

Thanks for clearing that up Graham, there seems to be some confusion over these channels among pilots as well as listening enthusiasts!

Airband Books

Aviation Posters

Yupiteru Scanners

Monday, April 03, 2006

Airband Reception

Aviation Posters

Airband Books



Hi Graham,

Noticed your comment on the airband news site about my radio. I bought a Uniden Bearcat UBC72 XLT. I use a scanner mainly to identify high level flights over my home in Warrington which I have been doing for years now. I suppose in a way it is my own fault for not really understanding that just because the scanner has the 8.33 step it still might not be sensitive enough to tune into all these new frequencies. I simply believed this to be the case, since the adverts in magazines imply that if a scanner has the 8.33 step then these new channels would be tuneable. I doubt I'd get my money back on that basis, as its my ignorance that is the problem! Funnily enough I could hear the controller again on the default of 132.125 this weekend. I suppose that is due to atmospheric conditions. I'll have to save up for the one Mark recommends and in the meantime just listen to the pilots when spotting. It seems quite odd really. I got my first air band radio off my dad way back in 1978 and 131.05 (together with originally 128.05) has been in use for my sector in all that time. Now its gone!

BTW your excellent air band books are in my collection. Maybe a brief section on this if they are updated may stop people making my mistake again.

Thanks for the interest and all the best

David Jackson



David

Thanks for your message.

If I have understood it correctly, you are saying that you purchased a scanner which has 8.33 channel tuning, but when you tune into the new channels you can only hear the pilots and not the controllers, whereas previously, on the old frequencies, you could hear them both.
If this is the case, it is not unusual. The same has happened with me, where there are separate channels for upper and lower airspace - I have always been able to hear the controller clearly on the old frequency, but I can't hear them on the new channel, even though they cover the same area.

I believe that this is because the signal for the channel is not as powerful, as it is for the higher levels. Therefore unless you are close to the transmitter, you will not pick it up. This will probably be the case whichever scanner you buy. I certainly wouldn't buy another one unless you are sure it will do the job. Also, a major upgrade of the UK transmitter sites has recently been completed, and this could have affected things.

Another point is the aerial. What are you using, how high are you, how far are you from the transmitter? All these things have a big influence on reception.

In my case, since these new channels started up, one of my best, 127.425 has changed to 127.430. I have now lost the controller, who I used to pick up clearly before. It is possible that they are no longer transmitting from two or three transmitters (known as offsets) as 8,33 channels can only be transmitted from one site for technical reasons.

To summarise, I don't think your scanner is the culprit. Other factors, which I have described above, are more likely to be the cause.

I am copying this to Mark Graham as he might think it worthwhile adding this to his site.

Regards

Graham


Thanks for the comments both, there can often be a number of factors such as those Graham has suggested. I can no longer pick up Nottingham East Midlands tower, the frequency has not changed but the location of the tower has changed slightly and in addition the new tower is much taller than the old which you would think would improve my reception but maybe they have reduced the transmitting power? there could be a number of factors, sometimes you can improve the situation by repositioning your antenna etc.


Airband

A message to Dave posted by Graham:

I would be interested to know which scanner Dave has purchased, as most modern sets can go down to 5kHz steps. Has he thought about taking it back as "not fit for purpose", especially if it was advertised in a misleading way?

Valid comment Graham, I would certainly be interested to know which airband scanner we are talking about here.

Mark